Q.51. The main principle of field surveying is to work from
(a) higher level to lower level
(b) lower level to higher level
(c) part of whole
(d) whole to part
Answer : option D
Q.52. If ‘i’ is the rate of interest expressed in decimal and ‘n’ is the number of years, then coefficient of annual find Ic is
Answer : option B
Q.53. Measurement of pressure difference between two points is, generally done by using
(a) Venturimeter
(b) Pitot tube
(c) Different manometer
(d) None of the above
Answer : option C
Q.54. Calcium chloride added in concrete acts as:
(a) retarder
(b) accelerator
(c) air entraining agent
(d) plasticizer
Answer : option B
Q.55. The plan of a building is in the form of a rectangle with center line dimensions of the outer walls as 10.3 m × 15.3 m. The thickness of the walls is superstructure is 0.3 m. Then its carpet area is
(a) 150 m³
(b) 157.59 m³
(c) 165.36 m³
(d) 170 m³
Answer : option A
Q.56. Pick up the item of work not included in the plinth area estimate
(a) Wall thickness
(b) Room area
(c) Veramdah area
(d) Courtryard area
Answer : option D
Q.57. One brick thickness of wall is roughly equal to
(a) 10 cm
(b) 15 cm
(c) 20 cm
(d) 30 cm
Answer : option C
Q.58. In order to determine the allowable stress in axial compression, Indian Standard Institution has adopted:
(a) Rankine’s formula
(b) Secant formula
(c) Euler’s formula
(d) Perry-Robertson formula
Answer : option A
Q.59. The sag tie in a truss is mainly used to reduce:
(a) moment and deflection
(b) tension
(c) weight of the truss
(d) compression
Answer : option C
Q.60. A simply supported beam carrying uniformly distributed load will be safe in deflection if the ratio of its span and depth is:
(a) < 24
(b) >19
(c) < 19
(d) > 24
Answer : option C
Q.53. Measurement of pressure difference between two points is, generally done by using
(a) Venturimeter
(b) Pitot tube
(c) Different manometer
(d) None of the above
Answer : option C
Q.54. Calcium chloride added in concrete acts as:
(a) retarder
(b) accelerator
(c) air entraining agent
(d) plasticizer
Answer : option B
Q.55. The plan of a building is in the form of a rectangle with center line dimensions of the outer walls as 10.3 m × 15.3 m. The thickness of the walls is superstructure is 0.3 m. Then its carpet area is
(a) 150 m³
(b) 157.59 m³
(c) 165.36 m³
(d) 170 m³
Answer : option A
Q.56. Pick up the item of work not included in the plinth area estimate
(a) Wall thickness
(b) Room area
(c) Veramdah area
(d) Courtryard area
Answer : option D
Q.57. One brick thickness of wall is roughly equal to
(a) 10 cm
(b) 15 cm
(c) 20 cm
(d) 30 cm
Answer : option C
Q.58. In order to determine the allowable stress in axial compression, Indian Standard Institution has adopted:
(a) Rankine’s formula
(b) Secant formula
(c) Euler’s formula
(d) Perry-Robertson formula
Answer : option A
Q.59. The sag tie in a truss is mainly used to reduce:
(a) moment and deflection
(b) tension
(c) weight of the truss
(d) compression
Answer : option C
Q.60. A simply supported beam carrying uniformly distributed load will be safe in deflection if the ratio of its span and depth is:
(a) < 24
(b) >19
(c) < 19
(d) > 24
Answer : option C
Very good question . Sir questions ka quantity to jayada kijiye at least daily basis 5o questions
ReplyDeleteI WILL TRY TO PUBLISH MORE QUESTION PER DAY AND I WILL ALSO START QUESTION SERIES FOR GATE AND IES EXAM.
Delete